product specification device part no:hubg--5108l features z lighting color bulish green z lens type water clear z standard t-1 3/4packagetype z high intensity, viewing angle:30 application: z used in trafic sign light z electronic sign and signals tolerance is 0.1mm unless otherwise noted. 5.0 8.6 1.0 25.4 min 1.5 2.54 5.9 1. all dimension are in millimeters. 2. tolerance is +0.20mm unless otherwise noted 3. producted resin under flanger is 1.5mm max 4. lead spacing is measured where the leads emerge from the package. 5 specification are subject to change without notice absolute maximum ratings ta = 25 characteristics series symbol testing condition max. min. unit power dissipation pd 120 mw reverse voltage v r i r = 50 a 5 v peak forward current ipeak duty=0.1 1khz 100 ma derating linear i/c 0.5 ma/ operating temperature range topr +80 -30 storage temperature range tstr +100 -40 lead soldering temperature tsol 260 for 5sec.3.0mm from resin anti-static voltage 1000 v electro-optical characteristics ta = 25 characteristics series symbol testing condition max. typ. min. unit forward voltage v f i f = 20ma 4.0 3.5 ---- v reverse current i r v r = 5v 100 a peak emission wavelength p i f = 10ma 505 nm spectrum width of half value ? i f = 10ma 20 nm luminous intensity angle 2 1/2 i f = 20ma 30 degre e luminous intensity i v i f = 20ma ----- ----- 2200 mcd
remarks 1. luminous intensity is measured by jf- tester. 2. all of the products are sensitive to static voltage. it is recommended that antistatic facilities like wrist band or antistatic gloves are used when handing the products. bin code of luminous intensity: intensity specification iv bin code iv (min) iv(max) t 1590 2225 u 2225 3115 v 3115 4360 cautions on led usage: 1. static electricity and surge will damage the leds, it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. 2. use grounded soldering iron and do not solder the leds at the conditions beyond the absolute maximum ratings specified in the data sheet. 3. hhec will not be held responsible for any damage caused by the operation exceeds the absolute maximum ratings. 4. use the leds as soon as possible once the ba g was opened. store and use where there is no corrosive gas . the leads of leds will be rust y when the leds were exposed to the air for longer than one month.
|
